UAB Baltkama represent MK Sp. z o.o., which since the very beginning of its existence has been among the leading manufacturers of flue gas extraction systems made of refined steel.


MK has obtained the quality management certificate ISO 9001:2000 and the environment management certificate ISO 14001: 2004.

Since 2005 we have been marking our products with CE mark which proves we meet any safety requirements of the EU.


 

















 

We offer: 
 
  • Single-wall chimney systems MKS
  • Double-wall insulated chimney systems MKD
  • Condensate chimney systems MKK
  • Flexible pipes MK-FLEX
  • Air-flue-gas chimney system MKPS
  • Copper plated chimney systems
  • Oval chimney systems
  • Chimney caps
  • Neutralizers, silencers


MKS
Single-wall system from acid-resistant sheet. The elements of the MKS system provide protection of the internal surfaces of ceramic chimneys against destructive impact of flue gases emitted in course of burning of fuel oil or gas.
The system is designed for operation in negative pressure and for flue gases whose temperature does not exceed 450oC.

MKKS
Single-wall system made from acid-resistant metal sheet for boilers which use the phenomenon of condensation of steam emitted in course of combustion. The elements of the system are welded, they have molding at the joints between the elements for a gasket. Owing to this solution  the system is tight  and it does not allow any leaking of the condensate from the flue-gas conduit.

 

 

MKD
Double-wall system made of a core from acid-resistant metal sheet, insulation 30 mm thick and jacket from stainless steel sheet.
The MKD system includes pipes, profiles and fixing clamps, owing to which the chimney of the MKD systemis an independent structure used as an external chimney or internal flue-gas conduits.
The system is designed for operation in negative pressure and for flue gases whose temperature does not exceed 450oC.
MKKD
Double-wall system made of a core from acid-resistant metal sheet, insulation 30 mm thick and jacket from stainless steel sheet. The joints between the elements have molding for gaskets which make the system appropriate for extraction of humid flue gas which contain large amount of condensate of the temperatur not higher than 200oC.
The system may operate both in negative pressure and overpressure.